Dedicated to becoming one of the leading commercial radar suppliers
24ghz doppler radar sensor
doppler radar motion sensor
human radar sensor
LDAM1103 mmwave radar
mmwave radar measurement
radar movement sensor
24ghz doppler radar sensor
doppler radar motion sensor
human radar sensor
LDAM1103 mmwave radar
mmwave radar measurement
radar movement sensor

24GHz Radar Speed Measurement Antenna With BGT34LTR11 Chip

The LDAM1103 speed-measuring radar antenna module adopts the German BGT34LTR11 series 24GHz radar MMIC chip, combined with a high-gain antenna design. Suitable for Doppler speed measurement applications, it features high sensitivity, low power consumption and compact size.

Main Parameters

Part number LDAM1103
Output I/Q Signal
Type Speed-measuring Radar Antenna Module
Working voltage 3.9-5.5V
Working current 38-49mA
Working Temperature -45~+85℃
Transmission frequency 24-24.25GHz
Temperature drift -1MHz/°C
Output power +18~+20dBm
Transmitter duty cycle 0.01
Spurious interference -30dBm
Low-noise amplifier 10dB
Receiver sensitivity -122dBm
Overall sensitivity -140dBc
Intermediate frequency output impedance 100Ω
Intermediate frequency amplification gain 50dB
I/Q signal amplitude balance 3dB
Phase shift of I/Q signals 80°-100°
Level 12°
Vertical 24°
Size L/W/H 61×61×7.5mm

Get Free Quote of 24GHz Radar Speed Measurement Antenna With BGT34LTR11 Chip

What is the operating frequency?
The LDAM1103 operates in the 24GHz band (24–24.25GHz), compliant with global ISM regulations.
What is the power consumption?
Typical current is 41mA at 5V, with low power consumption for energy-sensitive applications.
What is the output power and sensitivity?
EIRP output power is +18dBm to +20dBm. Receiver sensitivity is -122dBm, with overall system sensitivity of -140dBc.
What outputs does the module provide?
It provides I/Q intermediate frequency outputs with 90° phase shift, enabling speed and direction detection. IF range is 20Hz to 20kHz.
What are the beam width specifications?
-3dB beam width is 12° horizontal and 24° vertical, with side lobe suppression of -20dB and -18dB respectively.
What is the operating temperature range?
The module operates from -45°C to +85°C, suitable for both indoor and outdoor harsh environments.
What are the dimensions and interface?
Dimensions are 61×61×7.5mm. Interface is simple 6-pin: Vcc, GND, IFQ, IFI, and two NC pins.
How does LDAM1103 differ from LDAM1102?
LDAM1103 has a larger footprint (61×61mm vs 46×40mm) and different pin order (IFQ on pin 3, IFI on pin 4 vs the reverse on LDAM1102).

Technical Support & Custom Solution

We provide datasheet, dimension drawing, interface protocol, demo code and technical support.

Support sample test, ODM/OEM customized service, welcome global customers to inquire and cooperate.

Related Products

Related News

In early July 2026, an S-band fully polarized active phased-array weather radar model “WDSPT0152” was officially unveiled in Zhuhai, Guangdong. […]

The LDTGSS01 is a specialized 24GHz Doppler radar sensor designed specifically for low-speed ground speed measurement in agricultural and industrial applications. Engineered as a K-band […]

The LDMR100 is a high-performance 79GHz radar module specifically designed for close-range zone early warning and obstacle detection applications. Integrating antenna, RF circuit, and […]

The LDRR04 80GHz FMCW radar is a high‑precision, non‑contact sensing solution built for hydrological monitoring and industrial distance measurement. It […]

The LDRR03B 120GHz FMCW ranging radar is an ultra-high‑accuracy sensing solution built for professional industrial distance and level measurement. With […]

This 77GHz automotive radar is a high-performance ADAS sensor that combines Blind Spot Detection (BSD), Lane Change Assist (LCA), Rear […]

Scroll to Top

Get A Free Quote Now !

Contact Form
If you have any questions, please do not hesitate to contact us.
ir distance sensor